Configuration Guide 650
Configuring LLDP Viewing LLDP-MED Settings
Application
Type
Displays the supported applications of the local device.
Unknown Policy
Flag
Displays the unknown location settings included in the network policy TLV.
VLAN tagged Displays the VLAN Tag type of the applications, tagged or untagged.
Media Policy
VLAN ID
Displays the 802.1Q VLAN ID of the port.
Media Policy
Layer 2 Priority
Displays the Layer 2 priority used in the specific application.
Media Policy
DSCP
Displays the DSCP value used in the specific application.

Viewing the Neighbor Info
Figure 5-2 LLDP-MED Neighbor Info
Follow these steps to view LLDP-MED neighgbor information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the LLDP-MED Neighbor Info section, select the desired port and view the LLDP-
MED settings.
Device Type Displays the LLDP-MED device type of the neighbor device.
To Next Page
Loading...
Need help?
General