Configuration Guide 716
Configuring SNMP & RMON Notification Configurations
Step 3 end
Return to privileged EXEC mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the switch to enable all the SNMP DDM
trap:
Switch#configure
Switch(config)#snmp-server traps DDM
Switch(config)#end
Switch#copy running-config startup-config

(Optional) Enabling the Illegal DHCP Server Trap
Step 1 configure
Enter global configuration mode.
Step 2 snmp-server traps security dhcp-snoop
Enable illegal DHCP server trap to send SNMP trap message when untrusted port has
received DHCP Server packets.
Step 3 end
Return to privileged EXEC mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the switch to enable illegal DHCP server
trap:
Switch#configure
Switch(config)#snmp-server traps security dhcp-snoop
Switch(config)#end
Switch#copy running-config startup-config

(Optional) Enabling the Link-status Trap
Step 1 configure
Enter global configuration mode.
To Next Page
Loading...
Need help?
General