Configuring SNMP & RMON RMON Configurations
Configuration Guide
727
Step 2 rmon event
index
[ user
user-name
] [ description
description
] [ type { none | log | notify |
log-notify }] [ owner
owner-name
]
Configuring RMON event entries.
index:
Enter the index of the event entry from 1 to12 in the format of 1-3 or 5.
user-name:
Enter the SNMP user name or community name of the entry. The name should
be what you have set in SNMP previously. The default name is public.
description:
Give a description to the entry with 1 to 16 characters. By default, the
description is empty.
none | log | notify | log-notify
:
Specify the action type of the event; then the switch will take
the specified action to deal with the event. By default, the type is none. None indicates
the switch takes no action, log indicates the switch records the event, notify indicates the
switch sends notifications to the NMS, and log-notify indicates the switch records the event
and sends notifications to the NMS.
owner-name
:
Enter the owner name of the entry with 1 to 16 characters. The default name is
monitor.
Step 3 show rmon event [
index
]
Displays the specified event entry and related configurations.
index:
Enter the index of event entries that you want to view. The range is 1 to 12, and the
format is 1-3 or 5.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create an event entry on the switch. Set the user
name as admin, the event type as Notify (set the switch to initiate notifications to the NMS),
and the owner as monitor:
Switch#configure
Switch(config)#rmon event 1 user admin description rising-notify type notify owner
monitor
Switch(config)#show rmon event
Index User Description Type Owner State
----- ---- ----------- ---- ----- -----
1 admin rising-notify Notify monitor Enable
Switch(config)#end
Switch#copy running-config startup-config
To Next Page
Loading...
Need help?
General