EasyManuals Logo

TP-Link T1600G-52PS User Manual

TP-Link T1600G-52PS
771 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
Managing System Access Security Configurations
Configuration Guide
59
SSL Version 3 Select Enable to make the switch support SSL Version 3 protocol.
SSL is a transport protocol. It can provide server authentication, encryption and
message integrity to allow secure HTTP connection.
TLS Version 1 Select Enable to make the switch support TLS Version 1 protocol.
TLS is a transport protocol upgraded from SSL. It supports a different encryption
algorithm from SSL, so TLS and SSL are not compatible. TLS can support a more
secure connection.
2) In the CipherSuite Config section, select the algorithm to be enabled and click Apply.
RSA_WITH_
RC4_128_MD5
Key exchange with RC4 128-bit encryption and MD5 for message digest.
RSA_WITH_
RC4_128_SHA
Key exchange with RC4 128-bit encryption and SHA for message digest.
RSA_WITH_
DES_CBC_SHA
Key exchange with DES-CBC for message encryption and SHA for message
digest.
RSA_
WITH_3DES_
EDE_CBC_SHA
Key exchange with 3DES and DES-EDE3-CBC for message encryption and SHA
for message digest.
3) In the Session Config section, specify the Session Timeout and click Apply.
Session
Timeout
The system will log out automatically if users do nothing within the Session
Timeout time.
4) In the Access User Number section, select Enable and specify the parameters. Click
Apply.
Number Control Select Enable to control the number of the users logging in to the web
management page at the same time.
Admin Number Specify the maximum number of users whose access level is Admin.
Guest Number Specify the maximum number of users whose access level is Operator, Power
User or User.
Note:
For T1600G-18TS, the number of Operator, Power User and User can be set respectively.
5) In the Certificate Download and Key Download section, download the certificate and
key.
Certificate File Select the desired certificate to download to the switch. The certificate must be
BASE64 encoded. The SSL certificate and key downloaded must match each
other, otherwise the HTTPS connection will not work.

Table of Contents

Other manuals for TP-Link T1600G-52PS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T1600G-52PS and is the answer not in the manual?

TP-Link T1600G-52PS Specifications

General IconGeneral
BrandTP-Link
ModelT1600G-52PS
CategorySwitch
LanguageEnglish

Related product manuals