Xerox WORKCENTRE 3210

I – 4 WorkCentre 3210/3220 Multifunction Printer Service Manual
Media
envelopes, 1-22
supported types, 1-21
transparency type, 1-22
transport damage, 5-33
transport path, 2-3
Memory, 1-9
access door, 1-5
clear all memory, 4-6
DRAM test, 4-7
options, 1-2
part number, 9-37
removal, 8-116
ROM test, 4-8
specifications, 1-13, 2-22
type, 1-9
Menu map
tech mode, A-3
user, A-2
Middle Cover
part number, 9-5
removal, 8-65
MODEM Speed, 4-5
MODEM test, 4-7
N
Network
activity LED, 1-6
errors, 3-7
IP conflict error, 3-36
IPv4 protocols, 1-3
IPv6 protocols, 1-3
Noise, 5-39
Non-Xerox Print Cartridge, 1-23
O
OPC drum, 2-16
ghosting image, 5-15
image defects, 5-10
Optional Tray, 2-6
capacity, 1-2
connection, 1-5
dimensions, 1-19
part number, 9-35
removal, 8-117
supported media, 1-21
wiring, 10-18
Options
memory, 1-9
optional tray, 1-9
Out Bin Full Sensor, 2-28
part number, 9-9
removal, 8-70
wiring, 10-16
Output Tray
capacity, 1-2
P
Paper Empty Actuator
removal, 8-91
Paper Empty Sensor, 2-27
part number, 9-14
removal, 8-88
wiring, 10-16
Pause Time, 4-5
Pick Up Gear
part number, 9-12
removal, 8-76
Pick Up Roll
location, 1-10
part number, 9-12
Pick Up Roller, 2-7
life count, 1-10
operation, 2-7
removal, 8-9
Pick Up Solenoid, 2-28
part number, 9-13
removal, 8-79
wiring, 10-16
Platen
cleaning, 7-5
part number, 9-19
removal, 8-48
Platen Cover
part number, 9-23
removal, 8-42
Platen Glass, 2-12
part number, 9-25
Platen Hinge
part number, 9-21
removal, 8-44
PostScript
common problems, 4-28
fonts, 1-3
Power Cord
part number, 9-37
safety, v
Power Supply
part number, 9-5
removal, 8-104
troubleshooting, 4-23
wiring, 10-17
Power Supply Fan, 2-28
location, 10-6
part number, 9-7
removal, 8-108
Power Switch
location, 1-5
Pressure Roller, 2-15
operation, 2-15