Zeiss Humphrey II-i series User Manual

Custom Testing
Humphrey Field Analyzer II- i series User Manual 2660021145640 A
12-12
2A message will appear in the pop-up window, “Are you sure you
have entered all the points for this test?”
Press NO if you need to add more points. Press YES if you have entered
all test
points and now are ready to advance to the Parameter Setup
screen.
3Make any desired changes to the default parameters.
Press SELECTION COMPLETE.
If y
ou are creating a Custom Screening test, the Screening Parameter
Setup screen will appear.
Note: SITA Standard and SITA Fast are not available for use
with Custom tests.
4Name the completed Custom test.
Press YES if you wish to personalize the Custom Test. Press NO if you
wish to use the default name: “Custom Threshold” (or “Custom
Screening”).
Note: If you choose not to use unique names to identify your Custom test patterns, then more than
one Custom test can end up with the same name: “Custom Threshold” (or “Custom Screening”). We
recommend that you add information as described in the following step, so that your Custom test is
uniquely identified.

Zeiss Humphrey II-i series Specifications

General

Brand	Zeiss
Model	Humphrey II-i series
Category	Measuring Instruments
Language	English