Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
General Operation
2-27
Here is an example of an altered Main Menu screen. Some buttons
have the same test pattern but different strategies (Ex: Both a SITA
Fast™ 24-2 and a SITA Standard™ 24-2 test button are seen). Tests
normally found only in the Test Library have been added to the Main
Menu screen (Ex: Superior 64 Screening). You can save time by
customizing a button for a frequently used test with special
parameters (Ex: Central 10-2 with a red stimulus). Additional details
pertaining to the test have been added on a second line of text. Tests
may be removed to create space between buttons. If you wish to have
additional customized buttons, you will need to delete some of the
standard buttons. Though some tests have been removed from the
Main Menu, the tests can still be accessed from the Test Library.
1Start at the System Setup screen. Select ALTER MAIN MENU.
2Press ADD/CHANGE A BUTTON.
3Select the button position where the change is to take place.
4Choose from any test type, including SCREENING, THRESHOLD,
SPECIALTY, CUSTOM, and KINETIC tests. After selecting, the same Test
Library screens that are normally accessed through the Main Menu
screen will appear.
5Select the test pattern that you wish to add or change. The
Parameter Setup screen will appear. All test buttons start with
standard parameters.
6Change the existing parameters to suit your needs. Finalize your
choices by pressing SELECTION COMPLETE.
To Next Page
Loading...
