Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
General Operation
2-29
3Choose the button you wish to remove.
4If you want to delete a button, press DELETE when prompted.
5An example of an altered menu is shown to the left of this text. In
this example, the fourth button from the top in the right-hand column
has been removed. Note that deleted buttons will appear blank on the
Main Menu screen as shown; however, they will be marked “Test
Position Now Blank” on the Alter Main Menu screen.
Note: Any test you remove from the Main Menu screen still
can be accessed through SHOW TEST LIBRARY. Standard parameters
will be in effect when using a test from the Test Library unless
CHANGE PARAMETERS is selected before you begin testing.
Note: It is recommended you create a Configuration Backup to
save your unique Main Menu when you are finished. See “Backing Up
Configurations to a USB Storage Device,” on page 11-6.
To Next Page
Loading...
