Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Setting-Up Tests
3-9
For example, if you enter a name in each name field as shown on the
left, the final name will be displayed on one line with spaces separat-
ing the name fields (for each name entered) in the complete name
that is displayed on the Patient Data 1 screen, as shown below left.
Even though it will be displayed this way in your HFA II-
i
, the full name
will be displayed in the correct order in your EMR/PMS/DICOM appli-
cation.
4Input a total of up to 60 characters and spaces for at least one of
the name fields, using the pop-up keyboard. Pressing the CAPS key
will allow you to swit
ch between upper and lower case letters. Press
ENTER.
5Choose DATE OF BIRTH.
6Key in the Month, Day, and Year from the pop-up keypad, including
dashes (-) between entries. You may enter the year as either two digits
or all 4 numbers. The year will be displayed in the 4 digit format.
After typing in the needed information, press ENTER.
Note: September 22, 1943 should be entered as 9-22-43. The
patient is assumed to be less than 100 years old if you enter the year
as a two digit number.