Amadas 9980 - Page 131

9980 Self-Propelled Peanut Combine CommandTouch Cornerpost
Header Height Sensing
Header height sensing allows you to select the
position of the header relative to the ground
and return to that position automatically.
Note the following about the h
eader height
sensing function:
• The system must be calibrated with each
header that is used on the machine (see
Chapter 7, Calibration).
• Activation buttons 1, 2, or 3 (bottom photo)
are located on the multifun
ction control
handle and are used to select one of the
three different programmable header
heights.
• If both header height resume and header
height sensing are enabled, only activation
button 1 will activate header height
resume. Buttons 2 and 3 are assigned to
header height sensing.
Header height sensing is active when:
• A properly equipped header is connected
to the machine.
• The engine is running.
•
The road transport switch is in field
position (indicator light is OFF).
• The header height resume
system is
enabled.
• The header is engaged.
Header
height
sensing
Activation buttons
MAN109 09/04/15 119