Fuji Xerox DocuPrint CM305 df - FIP-1.62 062-320: Scanner Error

2 - 102
Chapter 2 Troubleshooting
FIP-1.62 062-320: Scanner Error
Step Check
Remedy
Yes No
Possible causative parts:
IIT ASSY SUB (PL10.1.11)
PWBA ESS AIO (PL8.1.2)
1
Checking the file data in the printer.
Print or clear the stored files and data at the printer memory.
Does the error still occur when scanning?
Go to step 2. End of work.
2
Checking the printer setting.
Is the [Resolution] of the [Scan Defaults] on the [Scan] of the
[Defaults Settings] the [600]?
Set to the default
value.
Go to step 3.
3
Checking the printer setting.
Is the [Color] of the [Scan Defaults] on the [Scan] of the
[Defaults Settings] the [Color (Photo)]?
Set to the [Color]. Go to step 4.
4
Checking after replacing the IIT ASSY SUB.
Replace the IIT ASSY SUB. (Refer to REP9.5.)
Does the error still occur when turning off and on the power?
Replace the KIT
PWBA ESS AIO.
(Refer to REP8.2.)
End of work.