6 – 10
Chapter 6 General
6.1.4.11 Paper
(1) Paper type
Paper which can be used with this printer is classified into standard paper, general paper and special
paper.
- Standard paper
Using this type of paper is recommended. Reliability, operability and print image quality are the
application range of the specifications.
Following paper is the standard paper.
- General paper
General paper is plain paper except standard paper and special paper, and its reliability and
running performance are within the specification, but the print image quality is out of the
specification.
- Special paper
Special paper except for plain paper. Reliability and operability are the applicable range of
specifications but the print image quality is out of the applicable range of specifications.
(2) Paper mass
- Paper feed from paper tray
"60 to 216 gsm" (16 lb to 80 lb)
(3) Paper size
Paper size which can be set to each paper pick-up unit is shown in the table below.
B/W F/C
For overseas market 4200MP X-pressions
Cassette Paper size
250 Sheet Paper Tray /
SSF
A5, B5 , A4, Letter, Executive, Legal, Folio, Monarch,
DL, C5, Com-10
Minimum size
Width 76.2mm (3 in) × Length 127mm (5 in)
Maximum size
Width 215.9mm (8.5 in) × Length 355.6mm (14 in)
To Next Page
Loading...
Need help?
General
