6 – 22
Chapter 6 General
6.1.9.7 Nom Genuine Mode
When life of toner cartridge has ended, the printer stops accepting print request (life of toner car-
tridge is counted by the counter in CRUM). Taking into consideration that some users use refilled
toner cartridges, the printer can accept print request by the user’s panel operation even if life of
toner cartridge has ended. When the mode has changed so that the printer does not stop even after
life of toner cartridge ends, the printer displays a message on the operation panel to inform the user
of the mode change. When the printer operates in this mode, print image quality is not guaranteed.
Also, remaining toner level is not displayed (as CRUM data can not be guaranteed).
6.1.9.8 Report Function
(1) PCL Fonts List
This list shows PCL Fonts.
Manual print: List is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(2) PCL Macros List
This list shows PCL Macros.
Manual print: List is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(3) Job History Report
This report shows Job History.
Manual print: Report is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(4) Error History Report
This report shows Error History.
Manual print: Report is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(5) Billing Meter
This report shows Print Volume.
Manual print: Report is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(6) Color Test Page
This Page shows Demo Print Page.
Manual print: Demo Page is printed by instructing from the operator panel, EWS, or ToolBox.
Auto print: Not supported.
(7) FAX Communication Management Report
This report shows FAX sender/receiver, time, result, etc. for 50 communications.
Manual print: Report is printed by panel operation.
Auto print: Report is printed out automatically when the total of FAX send/receive has exceeded
50.
User can specify whether to enable or disable auto print.