Fuji Xerox DocuPrint CM305 df - Rep9. Scanner Assy; Rep9.1 Adf Assy (Pl10.1.3)

4 - 258
Chapter 4 Disassembly / Assembly and Adjustments
REP9. SCANNER ASSY
REP9.1 ADF ASSY (PL10.1.3)
[Removal]
NOTE
To replace the HARN ASSY ADF (PL10.1.2), IIT ASSY SUB (PL10.1.11) must be
removed.
1) Remove the TRAY ASSY. (REP9.3)
2) Remove the one screw (silver, tap,
8mm) that fixes the COVER ASSY
REAR ADF (PL10.1.7) to the ADF
ASSY (PL10.1.3).
3) Slightly raise the right side of the
COVER ASSY REAR ADF, and then
move the COVER ASSY REAR ADF
to the left until its two hooks are
released.
4) Remove the one screw (silver, 4mm)
that fixes the grounding terminals
of the HARN ASSY ADF (PL10.1.2)
from the ADF ASSY.