2 - 150
Chapter 2 Troubleshooting
FIP-1.88 092-310: IOT CTD (ACD) Sensor Error
Step Check
Remedy
Yes No
Possible causative parts:
PHD ASSY (PL4.1.21)
DISPENSER ASSY (PL5.1.1)
FRAME ASSY MOT (PL5.1.2)
MOTOR ASSY DISP (PL5.1.3)
TONER CARTRIDGE (Y) (PL5.1.24)
TONER CARTRIDGE (M) (PL5.1.23)
TONER CARTRIDGE (C) (PL5.1.22)
TONER CARTRIDGE (K) (PL5.1.21)
HARN ASSY TNR MOT (PL5.1.25)
TRANSFER ASSY (PL6.1.7)
PWBA MCU (PL8.3.6)
1
Checking the protection sheet staying.
Is there the protection sheet on the PHD ASSY?
Remove the
protection sheet.
Go to step 2.
2
Checking the CTD (ADC) Sensor Window.
Open the COVER ASSY FRONT.
Is the CTD (ADC) Sensor window dirty?
Go to step 3. Go to step 4.
3
Turn off the power, and gently wipe the CTD (ADC) Sensor
window with a clean dry cloth or cotton swab.
After wiping the window, close the COVER ASSY FRONT.
Does the error still occur when the power is turned OFF and
ON?
Go to step 4. End of work.
4
Checking after resetting the TONER CARTRIDGE (Y, M, C
and K).
Reseat the TONER CARTRIDGE (Y, M, C and K), and
check that the lock key is in the lock position.
Does the error still occur when the power is turned OFF and
ON?
Go to step 5. End of work.
Rio01012KA
ADC Sensor window
To Next Page
Loading...
