2 - 47
Chapter 2 Troubleshooting
FIP-1.9 016-503 / 016-504 / 016-505 / 016-506 / 016-507 / 016-764 / 016-786: Server
Setting Error
Step Check
Remedy
Yes No
Possible causative parts:
PWBA ESS AIO (PL8.1.2)
1
Checking the network connection
Check the network connection using the [ping] command.
Does the printer connect the network?
Go to step 6. Go to step 2.
2
Checking the network connection
Reseat the network cable connector.
Does the error still occur when using the server?
Go to step 3. End of work.
3
Checking the network setting
Is the printer network setting correctly?
Go to step 4.
Set the [Wired] in
the [Admin Menu].
4
Checking the server setting
Is the [Address Book] setting correctly?
Go to step 5.
Set the [Address
Book] in the
[Admin Menu].
5
Checking the spec.
Does the printer spec. meet the server spec?
Go to step 6.
Change the
server.
6
Checking the PWBA ESS AIO installation
Reseat the KIT PWBA ESS AIO. (Refer to REP8.2.)
Does the error still occur when using the server?
Replace the KIT
PWBA ESS AIO.
(Refer to REP8.2.)
End of work.
To Next Page
Loading...
Need help?
General
