6 – 51
Chapter 6 General
6.3.2 System Data
- A change of setting for the items with USER written in Access can normally be made from the panel
menu. A change of setting for the items with CE can be made in diagnostics only.
-
A change of setting for the items with
written in Customer can be made in Customer Mode (diagnostics).
- The settings for the items with written in the OFF/ON column became effective after the power is
turned OFF then ON. (Excluding the items with CE in Access)
- Numerical values under "Value" and "Default" are basically expressed in decimal. Ones with "0x" are
expressed in hexadecimal and ones enclosed in "" in "ASCII codes".
FAX-related
Chain
-Link
Description Name Value Label
Default
Details Access
OFF/
ON
701-009
Activity Report: second priority
setting for showing remote
terminal
SEL_OPP_NAME
0: Remote Terminal name
(to be displayed only when
the protocol is unique.)
1CE
701-010
Set whether to forward received
FAX
FORWARD_SET
0: Not forward
1: Forward only at error
occurrence
2: Always forward
0USER
701-011
Set whether to print when
forwarding received FAX
FORWARD_PRINT
0: Not print at forward
1: Print at forward
0USER
701-012
Action at error occurrence in
forwarding received FAX with
"Not print at forward" selected.
FWD_ERR_PRN_NA_PRINT
0: Not print
1: Print
1USER
790-401 Receive Resolution selection G3M_RX_RESO
0x00: Normal
0x01:400,300,200,100
0x02:R16x15.4,R8x15.4,R
8x7.7,R8x3.85
0x04:R8x15.4,R8x7.7,RR
8x3,85
0x08:300,200,100
0x10:200,100
0x20:R8x7.7,R8x3.85
0x40:100
0x80:R8x3.85
0x00 CE
820-001 Dial Type DIALLING_TYPE
0: PB
1: DP10
2: DP20
0USER
821-101 Operation Mode SYS_MACHINE_MODE
0: normal mode
1: maintenance mode
0
The output of monitor sounds
from the speaker at FAX
communication requires
selection of "1".
CE
821-201
Action to take after such an
error occurs as "memory over
capacity" because of stored jobs
to send
CONTINUE_ILLEGAL
0: Delete all.
1: Output stored docs.
1
Determine which action to take
if an error occurs during storing
jobs to send. To fax all pages
already scanned, select "1". To
delete all pages scanned/being
scanned/to be scanned, select
"0".
CE
821-202
Interrupts receiving FAX.
Threshold of Remaining
Memory (%) to prohibit
receiving FAX (with Color FAX
disabled)
THRESH_MEMRX
0
～
100:0%
～
100%
0CE
821-203
Threshold of Remaining
Memory (%) to switch to
immediate receiving
THRESH_RXPRINT
0
～
99:0%
～
99%
20 CE
821-204
Threshold of Remaining
Memory (%) to interrupt storing
docs to send and to prohibit
starting storing docs to send.
THRESH_MEMTX
0
～
100:0%
～
100%
0CE
821-205 Disable/Enable Color FAX CAPAB_COLOR_FAX
0: Disable
1: Enable
0USER
821-206
Threshold of Remaining
Memory (%) to disable
receiving FAX (with Color FAX
enabled)
THRESH_COLOR_FAX_RX
0:0.5MB
1:1.0MB
2:1.5MB
0CE
821-207
Threshold of Remaining
Memory (%) to start garbage
collection
THRESH_GC_START
0
～
99:0%
～
99%
50 CE
821-401
Page Margin
(Reduction: OFF)
PAGE_MARGIN
0
～
127:0mm
～
127mm
20 CE
To Next Page
Loading...
