Fuji Xerox DocuPrint CM305 df - Rep1.8 Cover Assy Side R Aio (Pl1.1.12)

4 - 28
Chapter 4 Disassembly / Assembly and Adjustments
REP1.8 COVER ASSY SIDE R AIO (PL1.1.12)
[Removal]
1) Remove the CASSETTE ASSY 250 MG AIO. (REP2.1)
2) Open the COVER ASSY FRONT (PL1.2.1).
NOTE
Cover the drum of the PHD ASSY to avoid exposure to light.
3) Remove the PHD ASSY. (REP4.6)
NOTE
The FUSING UNIT part is very hot. Take added care not to get burned when
performing the service operation.
4) Remove the FUSING UNIT. (REP6.1)
5) Open the COVER WINDOW TNR AIO (PL1.1.7).
6) Remove the one screw (sliver, tap,
8mm) that fixes the STRAP ASSY
AIO (PL1.2.30) to the COVER ASSY
FRONT, remove the STRAP ASSY
AIO from the COVER ASSY
FRONT.
7) Remove the eight screws (silver,
tap, 8mm) that fix the COVER
ASSY SIDE R AIO (PL1.1.12) to the
printer.