Fuji Xerox DocuPrint CM305 df - FIP-1.98 094-911: IOT Belt Unit Life over

2 - 164
Chapter 2 Troubleshooting
FIP-1.98 094-911: IOT Belt Unit Life Over
Step Check
Remedy
Yes No
Possible causative parts:
TRANSFER ASSY (PL6.1.7)
PWBA MCU (PL8.3.6)
1
Does the error still occur when the power is turned OFF and
ON?
Go to step 2. End of work.
2
Checking the life counter value of the TRANSFER ASSY.
Does the life counter value show the near of the end? (Refer
to Chapter 2 for details of the life counter value.)
Initialize the life
counter value at
the Customer
Diag, after
replacing the KIT
TRANSFER
ASSY. (Refer to
REP6.3.)
Replace the KIT
PWBA MCU.
(Refer to
REP8.10.)