Fuji Xerox DocuPrint CM305 df - Install Print Drivers

9 – 9
Chapter 9 Installation and Removal
9.1.10 Install Print Drivers
3) Set the Driver CD.
NOTE
- Do not select anything in New Hardware Found Wizard that appears when the
printer and your computer are connected via a USB cable.
- If the above screen does not appear automatically, double-click eznavi.exe in the
SetupVideo folder included on the Driver CD Kit.
1) When connecting via TCP/IP
1. Click [Installing Driver and Software].
2. Follow the instructions displayed on the installer screen.
2)
When connecting via USB
1. Click [Installing Driver and Software].
2. Select the [Documentation] tab.
3. Select [CD-ROM Documentation (HTML)].
4. Select [DocuPrint CM305 df] > [Driver Installation]
> [Installing a Printer Connected via
the USB port], and follow the instructions.
NOTE
For information on how to install PostScript driver on a Macintosh computer, see
the PostScript User Guide.
Setup is Complete!