2 - 50
Chapter 2 Troubleshooting
FIP-1.12 016-718: Memory Over flow
Step Check
Remedy
Yes No
Possible causative parts:
MEMORY CARD (OPTION) (PL8.1.4)
1
Checking for memory expansion.
Is additional memory installed?
Is the additional memory installed properly?
Go to step 2.
Install additional
memory.Or, re-
install it properly.
2
Checking after setting the Print Mode to "Standard" via the
printer driver Set the Print Mode of the printer driver to
"Standard".
Does the error persist during printing?
Go to step 3. End of work.
3
Deleting the data by executing Clear Storage.Execute
"Clear Storage"under [Maintenance] in the Control Panel.
Does the error persist during printing?
The current
printing job
process cannot be
continued
because the
memory capacity
is exceeded.
End of work.
To Next Page
Loading...
