10 – 18
Chapter 10 Machine Overview
10.7.3 Receive Fault
1) Problem with printing quality, such as corrupt image, lines in image, top/bottom cut off.
a)If copy function is normal
Cause:Degraded telephone line connection caused by noise, etc.; or a fault in sending FAX's
scanner.
Corrective Action:
Determine whether fault is in telephone line or at sending FAX by trying copy function at receiving
FAX.
If the telephone line condition is degraded, white horizontal lines, missing rows,
and/or cut-off top/bottom may occur.
Branch connections or an incoming call (call waiting) may also cause image
corruption.
b)If copy function is faulty
Cause:Dirt or fault in printer.
Corrective Action:
Clean all parts of printer or repair printer.
2) Does not emit response signal
Cause:Incorrect connection. Incorrect setup of dial type, line type, and/or reception mode.
Corrective Action:
Correct the connection. Reset the dial type, line type, and/or receive mode to correct settings.
If a call is made to the FAX from a telephone, and the FAX does not emit its
ringing sound, a telephone line fault is highly probable.
To Next Page
Loading...
