Fuji Xerox DocuPrint CM305 df - Rep1.6 Cover Side R Aio (Pl1.1.6), Cover Window Tnr Aio (Pl1.1.7)

4 - 22
Chapter 4 Disassembly / Assembly and Adjustments
REP1.6 COVER SIDE R AIO (PL1.1.6), COVER WINDOW TNR AIO (PL1.1.7)
[Removal]
1) Remove the CASSETTE ASSY 250 MG AIO. (REP2.1)
2) Open the COVER ASSY FRONT (PL1.2.1).
NOTE
Cover the drum of the PHD ASSY to avoid exposure to light.
3) Remove the PHD ASSY. (REP4.6)
NOTE
The FUSING UNIT part is very hot. Take added care not to get burned when
performing the service operation.
4) Remove the FUSING UNIT. (REP6.1)
5) Remove the COVER ASSY SIDE R AIO. (REP1.8)
6) Release the boss on the upper hinge
of the COVER WINDOW TNR AIO
(PL1.1.7) from the hole of the
COVER SIDE R AIO (PL1.1.6).
7) Release the boss on the lower hinge
of the COVER WINDOW TNR AIO
from the hole of the COVER SIDE R
AIO.