2 - 51
Chapter 2 Troubleshooting
FIP-1.13 016-720: PDL Error
Step Check
Remedy
Yes No
Possible causative parts:
PWBA ESS AIO (PL8.1.2)
1
Check the cable between the Printer and PC (or Printer and
Hub).
- For local printer: USB cable (USB2.0)
- For network printer:Ethernet cable (10Base-T/100Base-TX
/ 1000Base-T)
Does the cable meet the specifications?
Go to step 2.
Use a cable that
meets the
specifications.
- For local printer:
USB cable
(USB2.0)
- For network
printer: Ethernet
cable(10Base-T/
100Base-TX /
1000Base-T)
2
Checking cable plug/unplug.
Plug and unplug the cable. (USB cable or I/F cable)
Does the error still occur when printing?
Go to step 3. End of work.
3
Checking after replacing the Cable.
Replace the the cable. (USB cable or I/F cable)
Does the error still occur when the power is turned off and
on?
Replace the KIT
PWBA ESS AIO.
(Refer to REP8.2.)
End of work.
To Next Page
Loading...
