4 - 312
Chapter 4 Disassembly / Assembly and Adjustments
4.3 Adjustments
ADJ10.1 Firmware download (Controller and MCU)
You can download firmware from a PC to the main processor, to upgrade. Communication interfaces
support a network (Port9100), a USB port, and a parallel port. This document describes examples of
using a USB port.
- Servicing duration
Controlle : About 5 minutes
MCU : About 3 minutes
- Working procedure
1) If "Ready" on the Main Processor Operation Panel, start xeroxfwup.exe.
2) Select [USB] and click "Next" button.
To Next Page
Loading...
Need help?
General
