Fuji Xerox DocuPrint CM305 df - FIP-1.20 016-799: Job Environment Violation

2 - 58
Chapter 2 Troubleshooting
FIP-1.20 016-799: Job Environment Violation
Step Check
Remedy
Yes No
Possible causative parts:
PWBA ESS AIO (PL8.1.2)
1
Checking the paper size.
Does the paper size in use meet the specifications?
Go to step 3.
Use the paper that
meets the
specifications,
then go to step 2.
2 Does the error still occur when printing? Go to step 3. End of work.
3
Checking the paper size setup.
Does the using paper size match the printer setup value?
Go to step 5. Go to step 4.
4
Setup the paper size through your PC.
Does the error still occur when printing?
Go to step 5. End of work.
5
Checking the printing job.
Does the error still occur when printing the Windows test
print?
Go to step 6. End of work.
6
Checking the firmware version.
Is the firmware the latest version?
Replace the KIT
PWBA ESS AIO.
(Refer to REP8.2.)
Upgrade the
firmware.