6 – 62
Chapter 6 General
6.4.2 Configuration
The diagnosis provides two modes that have their respective uses (purposes), target operators, and
functions.
Only "CE Mode" is detailed in this manual.
CE (Customer Engineer) Mode:
This mode intends to be used by CE (Customer Engineer) who handle problems in field with the
purpose to locate a replaceable unit that causes a problem.
The mode allows the CE to execute the ESS diagnosis, test prints, parameter settings FAX,
Scanner and so on through the control panel.
Developer Mode:
This mode is for debugging by developers. It intends to be partially used in the production line.
The mode allows the user to execute the ESS diagnosis, test prints, parameter settings and so
on through the debug terminal.
The functions are activated by commands sent from the serial terminal.Special tool (FX inter-
nal debugging terminal) is required to operate Developer mode.
This mode is protected password.
To Next Page
Loading...
Need help?
General
