EasyManua.ls Logo

Fuji Xerox DocuPrint CM305 df - Operating Environment; Installation Temperature; Humidity; Installation Altitude; Installation Horizontality

Fuji Xerox DocuPrint CM305 df
879 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 – 11
Chapter 6 General
6.1.5 Operating Environment
6.1.5.1 Installation Temperature / Humidity
Installation temperature and humidity on the condition without condensation is as follows.
At operating: 10-32 °C, 10-85%RH (No condensation)
6.1.5.2 Installation Altitude
0 to 3,100m
6.1.5.3 Installation Horizontality
This machine functions normally in a horizontal position or any position with the maximum allowable
level difference of 5 mm or less in longitudinal direction, and 10 mm or less in lateral direction.
6.1.5.4 Ambient Lighting
3000 Lux or less (without direct sun beams)
6.1.5.5 Storage Temperature of a Toner Cartridge
The guaranteed period of the print cartridge before unpacked is as follows:
Normal conditions: 12 months under 0 to 35°C, 15 to 80% RH.
Harsh conditions: Up to 48 hours (Max) under -20 to 0°C and 35 to 40°C, 5 to 15% RH and 80 to 95%
RH.
The storage altitude shall be 0 to 3,100m. Can be extended to 0 to 15,000m when shipped by air.
(Provided that the cargo bay is pressurized to 70.9275Kpa or higher.)

Table of Contents

Other manuals for Fuji Xerox DocuPrint CM305 df

Related product manuals