Fuji Xerox DocuPrint CM305 df Service Manual

6 – 61
Chapter 6 General
6.4 Service Mode
6.4.1 peration of Diag.
6.4.1.1 Purpose of This Software
This software is mainly intended for the following purposes:
• ESS diagnosis to locate a chip which causes a problem
• Diagnosing IOT
• Setting parameters such as registration in the feeding direction.
6.4.1.2 Operating Methods
This software can be operated via the Control Panel.

Fuji Xerox DocuPrint CM305 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM305 df
Category	Printer
Language	English