4 - 300
Chapter 4 Disassembly / Assembly and Adjustments
REP10.4 KIT HARNESS ASSY DUP (PL11.1.99)
[Removal]
1) Press the latch button to open the COVER ASSY FRONT (PL1.2.1).
2) Remove the FEEDER ASSY DUP AIO STD. (REP10.1)
3) Remove the COVER PWBA DUP. (REP10.2)
[Replacement]
Replace in the reverse order of the removal procedure.
When installing the KIT HARNESS ASSY DUP, insert the hooks of the HARNESS
ASSY DUP connector (J272) securely into the SPRING CONNECT DUP
(PL11.1.12).
4) Disconnect the HARNESS ASSY DUP (PL11.1.14) connector (P/J601) that is connected to the
PWBA DUP (PL11.1.16) and release the harness of the HARNESS ASSY DUP from the hooks of
the CHUTE DUP FRAME (PL11.2.9).
5) Release the hooks (x2 locations) of the HOLDER CONNECT DUP (PL11.1.13) and remove the
KIT HARNESS ASSY DUP (PL11.1.99).
To Next Page
Loading...
