3 - 29
Chapter 3 Image Quality Troubleshooting
8
Checking the Toner Type
Is the XEROX Toner seated?
Go to step 9.
Replace the toner
with the XEROX
toner.
9
Checking after resetting the PHD ASSY.
Reseat the PHD ASSY.
Is the image printed correctly?
End of work. Go to step 10.
10
Checking after resetting the PWBA HVPS.
Reseat the PWBA HVPS.
Is the image printed correctly?
End of work. Go to step 11.
11
Checking after replacing the PHD ASSY.
Replace the PHD ASSY. (Refer to REP4.6.)
Is the image printed correctly?
End of work.
Replace the
PWBA HVPS.
(Refer to REP4.5.)
Step Check
Remedy
Yes No
To Next Page
Loading...
