Fuji Xerox DocuPrint CM305 df - Page 254

3 - 32
Chapter 3 Image Quality Troubleshooting
5
Checking the Toner Type
Is the XEROX Toner seated?
Go to step 6.
Replace the toner
with the XEROX
toner.
6
Checking after resetting the KIT ROS ASSY.
Reseat the KIT ROS ASSY.
Is the image printed correctly?
End of work.
Replace the KIT
ROS. (Refer to
REP4.1.)
Step Check
Remedy
Yes No