Fuji Xerox DocuPrint CM305 df Service Manual

3 - 46
Chapter 3 Image Quality Troubleshooting
10 Is the image printed correctly? End of work. Go to step 11.
11
Checking after resetting the HOLDER ASSY SEPARATOR
Reseat the HOLDER ASSY SEPARATOR.
Is the image printed correctly?
End of work. Go to step 12.
12
Checking after replacing the HOLDER ASSY SEPARATOR.
Replace the KIT HOLDER ASSY SEPARATOR. (Refer to
REP2.2.)
Is the image printed correctly?
End of work. Go to step 13.
13
Checking after resetting the ROLL ASSY FEED.
Reseat the ROLL ASSY FEED.
Is the image printed correctly?
End of work.
Replace the KIT
ROLL ASSY
FEED. (Refer to
REP3.3.)
Step Check
Remedy
Yes No

Fuji Xerox DocuPrint CM305 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM305 df
Category	Printer
Language	English