Fuji Xerox DocuPrint CM305 df - Clearing Paper Jams From the Fuser Unit

4 - 110
Chapter 4 Disassembly / Assembly and Adjustments
Check the ACTUATOR SSI movement, after the procedure 3 is completed.
3) Secure the left shaft of the ACTUA-
TOR SSI with the hook of the
CHUTE UP, attach the ACTUA-
TOR SSI.
4) Mate the five tabs of the BRACKET
SNS with the printer.
5) Mate the two holes of the BRACKET
SNS with the bosses of the printer.