4 - 117
Chapter 4 Disassembly / Assembly and Adjustments
25) Disengage the connector (P/J144) of
the PWBA EEPROM (PL8.3.4),
release the HARN ASSY PHD
XPRO (PL9.1.11) from the clamp,
pull the HARN ASSY PHD XPRO
out from the hole of the CHASSIS
MCU.
26) Remove the two screws (silver,
6mm) that fix the under part of the
CHASSIS MCU.
27) Remove the one screw (silver, 6mm)
that fixes the side part of the CHAS-
SIS MCU.
To Next Page
Loading...
