2 - 33
Chapter 2 Troubleshooting
116
396
Scan Error
Error 116-396
Restart Printer
<Software Bag>
-Fatal Maillib Related Error.
-Other File2Net Lib Error.
FIP-1.8
This code is given when the optional 512 MB memory module is installed.
721
Memory Full
Job too Large
Error 116-721
Press Ok Button
<Collate Full>
Unable to collate due to insufficient memory.
FIP-1.102
987
Scan Error
Error 116-987
Restart Printer
<Software Bag>
A fatal error related to the format library.
FIP-1.8
117
315
MFP EEPROM Error
Error 117-315
Restart Printer
<EEPROM Driver Error>
The EEPROM Driver program error occurred.
FIP-1.8
331
Controller Error
Error 117-331
Restart Printer
<DSP-related Program Internal Error>
In relation to DSP, the following internal error has
occurred.
EOS function return value error.
EDSP program load fail.
FIP-1.8
344
Fax Error
Error 117-344
Restart Printer
<FLASHFILE Task Error>
The FLASHFILE Task error occurred.
FIP-1.8
362
MFP EEPROM Error
Error 117-362
Restart Printer
<EEPROM Sum Check Error>
EEPROM sumcheck value error.
FIP-1.8
363
MFP NVM Error
Error 117-363
Restart Printer
<NVM Sum Check Error>
NVM sumcheck value error.
FIP-1.8
365
RTC Low Voltage
Error
Error 117-365
Restart Printer
<Low Voltage>
RTC detected Low Voltage. RTC clock setting and
content of SRAM are invalid. Initialize them.
FIP-1.8
123 314
Control Panel Error
Error 123-314
Restart Printer
<Panel Power On Error>
Communication error at panel
power on.
Startup sequence does not start
from AIOC within 1 minute after
panel power on.
FIP-1.8
131
398
Scan Error
Error 131-398
Restart Printer
<SMB Error>
A fatal error occurred in SMB client.
FIP-1.8
399
Scan Error
Error 131-399
Restart Printer
<FTP Error>
A fatal error occurred in FTP client.
FIP-1.8
133
231
Fax Communication
Error
Error 133-231
Restart Printer
<TFAXCOM Data Receive I/F Error>
The data processing interface error on TFAXCOM.
FIP-1.25
234
Fax Error
Error 133-234
Restart Printer
<JBIG Parameter Error>
The JBIG parameter setting error occurred.
FIP-1.25
Status
Code
Error Message
Status Contents
FIP to be
referred
LCD