6 – 127
Chapter 6 General
(7) Exit Mode
Completes the diagnosis operation and reboot the data.
- Executing Exit Mode
1) Turn off the power.
2) Turn on the power while holding down "" and "" keys.
3) Release the fingers from these keys when "the message" is displayed.
4) The "Customer Mode", "Printer" and "FAX Scanner" are displayed. (Entered the Diag. mode.)
5) Press "OK" key. (Entered the Printer Diag. mode.)
6) Press "" to select "Complete Exit", and then press "OK" key.
7) Press "OK" key twice to execute the setting.
To exit the operation or to returning to one step higher menu, press "STOP" key.
- Complete Exit
Completes the diagnosis operation and reboot the data.
To Next Page
Loading...
