H3C S3100 8C SI - Displaying and Maintaining Ip Performance Configuration

Operation Manual –IP Address-IP Performance
H3C S3100 Series Ethernet Switches Chapter 2 IP Performance Configuration
2-3
Table 2-3 Disable sending ICMP error packets
Operation Command Remarks
Enter system view
system-view
—
Disable sending ICMP
redirects
undo icmp redirect send
Required
Enabled by default
Disable sending ICMP
destination unreachable
packets
undo icmp unreach
send
Required
Enabled by default
2.3 Displaying and Maintaining IP Performance
Configuration
After the above configurations, you can execute the display command in any view to
display the running status to verify your IP performance configuration.
Use the reset command in user view to clear the IP, TCP, and UDP traffic statistics.