H3C S3100 8C SI - Enabling;Disabling the Web Server

Operation Manual – Login
H3C S3100 Series Ethernet Switches
Chapter 5 Logging in through the Web-based
Network Management System
5-4
Figure 5-4 Banner page displayed when a user logs in to the switch through Web
Click <Continue> to enter user login authentication page. You will enter the main page
of the Web-based network management system if the authentication succeeds.
5.4 Enabling/Disabling the WEB Server
Table 5-3 Enable/Disable the WEB Server
Operation Command Description
Enter system view
system-view
—
Enable the Web
server
ip http shutdown
Required
By default, the Web server is enabled.
Disable the Web
server
undo ip http
shutdown
Required
 Note:
To improve security and prevent attack to the unused Sockets, TCP 80 port (which is
for HTTP service) is enabled/disabled after the corresponding configuration.
z Enabling the Web server (by using the undo ip http shutdown command) opens
TCP 80 port.
z Disabling the Web server (by using the ip http shutdown command) closes TCP
80 port.