2-26
 Note:
z After completing the above configuration, you can execute the cluster switch-to
{ member-number | mac-address H-H-H } command on the management device to
switch to member device view to maintain and manage a member device. After that,
you can execute the cluster switch-to administrator command to return to
management device view.
z In addition, you can execute the reboot member { member-number | mac-address
H-H-H } [ eraseflash ] command on the management device to reboot a member
device. For detailed information about these operations, refer to the preceding
description in this chapter.
z After the above configuration, you can receive logs and SNMP trap messages of all
cluster members on the NMS.
2.4.2 Enhanced Cluster Feature Configuration Example
I. Network requirements
z The cluster operates properly.
z Add the device with the MAC address 0001-2034-a0e5 to the cluster blacklist, that
is, prevent the device from being managed and maintained by the cluster.
z Save the current cluster topology as the base topology and save it in the flash of
the local management device in the cluster.
To Next Page
Loading...
Need help?
General