H3C S3100 8C SI User Manual

Operation Manual – CLI
H3C S3100 Series Ethernet Switches Chapter 1 CLI Configuration
1-13
II. Partial online help
1) Enter a character/string, and then a question mark (?) next to it. All the commands
beginning with the character/string will be displayed on your terminal. For
example:
<Sysname> p?
ping
pwd
2) Enter a command, a space, a character/string and a question mark (?) next to it.
All the keywords beginning with the character/string (if available) are displayed on
your terminal. For example:
<Sysname> display u?
udp
unit
user-interface
users
3) Enter the first several characters of a keyword of a command and then press
<Tab>. If there is a unique keyword beginning with the characters just typed, the
unique keyword is displayed in its complete form. If there are multiple keywords
beginning with the characters, you can have them displayed one by one (in
complete form) by pressing <Tab> repeatedly.
1.4.2 Terminal Display
The CLI provides the screen splitting feature to have display output suspended when
the screen is full. When display output pauses, you can perform the following
operations as needed (see
Table 1-8).
Table 1-8 Display-related operations
Operation Function
Press <Ctrl+C>
Stop the display output and execution of
the command.
Press any character except <Space>,
<Enter>, /, +, and - when the display
output pauses
Stop the display output.
Press the space key Get to the next page.
Press <Enter> Get to the next line.
1.4.3 Command History
The CLI provides the command history function. You can use the display
history-command command to view a specific number of latest executed commands

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English