H3C S3100 8C SI User Manual

Operation Manual – File System Management
H3C S3100 Series Ethernet Switches Chapter 1 File System Management Configuration
1-2
Table 1-2 describes the directory-related operations.
Perform the following configuration in user view.
Table 1-2 Directory operations
To do… Use the command… Remarks
Create a directory
mkdir directory
Optional
Delete a directory
rmdir directory
Optional
Display the current work directory
pwd
Optional
Display the information about
specific directories and files
dir [ /all ] [ file-url ] Optional
Enter a specified directory
cd directory
Optional
 Note:
z Only empty directories can be deleted by using the rmdir command.
z In the output information of the dir /all command, deleted files (that is, those stored
in the recycle bin) are embraced in brackets.
1.1.4 File Operations
The file system also provides file-related functions listed in Table 1-3.
Perform the following configuration in user view. Note that the execute command
should be executed in system view.
Table 1-3 File operations
To do… Use the command… Remarks
Delete a file
delete [ /unreserved ]
file-url
delete { running-files |
standby-files }
[ /unreserved ]
Optional
A deleted file can be
restored by using the
undelete command if you
delete it by executing the
delete command without
specifying the
/unreserved keyword.
Restore a file in the
recycle bin
undelete file-url Optional
Delete a file from the
recycle bin
reset recycle-bin
[ file-url ] [ /force ]
Optional
Rename a file
rename fileurl-source
fileurl-dest
Optional

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English