H3C S3100 8C SI User Manual

Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration
2-10
Caution:
z The following characters are not allowed in the user-name string: /:*?<>. And you
cannot input more than one “@” in the string.
z After the local-user password-display-mode cipher-force command is executed,
any password will be displayed in cipher mode even though you specify to display a
user password in plain text by using the password command.
z If a user name and password is required for user authentication (RADIUS
authentication as well as local authentication), the command level that a user can
access after login is determined by the privilege level of the user. For SSH users
using RSA shared key for authentication, the commands they can access are
determined by the levels set on their user interfaces.
z If the configured authentication method is none or password authentication, the
command level that a user can access after login is determined by the level of the
user interface.
z If the clients connected to a port have different authorization VLANs, only the first
client passing the MAC address authentication can be assigned with an
authorization VLAN. The switch will not assign authorization VLANs for subsequent
users passing MAC address authentication. In this case, you are recommended to
connect only one MAC address authentication user or multiple users with the same
authorization VLAN to a port.
z For local RADIUS authentication to take effect, the VLAN assignment mode must
be set to string after you specify authorization VLANs for local users.
2.1.6 Cutting Down User Connections Forcibly
Table 2-8 Cut down user connections forcibly
Operation Command Remarks
Enter system view
system-view
—
Cut down user
connections forcibly
cut connection { all | access-type
{ dot1x | mac-authentication } | domain
isp-name | interface interface-type
interface-number | ip ip-address | mac
mac-address | radius-scheme
radius-scheme-name | vlan vlan-id |
ucibindex ucib-index | user-name
user-name }
Required

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English