H3C S3100 8C SI - Configuring Member Devices

Operation Manual – Stack-Cluster
H3C S3100 Series Ethernet Switches Chapter 2 Cluste
r
2-15
Operation Command Description
Enter system view
system-view
—
Enter cluster view
cluster
Required
Configure a shared FTP
server for the cluster
ftp-server ip-address
Optional
By default, the
management device acts
as the shared FTP server.
Configure a shared TFTP
server for the cluster
tftp-server ip-address
Optional
By default, no shared
TFTP server is
configured.
Configure a shared
logging host for the cluster
logging-host ip-address
Optional
By default, no shared
logging host is configured.
Configure a shared SNMP
host for the cluster
snmp-host ip-address
Optional
By default, no shared
SNMP host is configured.
2.2.2 Configuring Member Devices
I. Member device configuration tasks
Complete the following tasks to configure the member device:
Task Remarks
Enabling NDP globally and on specific ports Required
Enabling NTDP globally and on a specific port Required
Enabling the cluster function Required
Accessing the shared FTP/TFTP server from a
member device
Optional