H3C S3100 8C SI User Manual

Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration
2-2
Table 2-2 AAA configuration tasks (configuring separate AAA schemes for an ISP
domain)
Task Remarks
Creating an ISP Domain and
Configuring Its Attributes
Required
Configuring separate AAA schemes Required
Configuring an AAA Scheme for an
ISP Domain
Required
z With separate AAA
schemes, you can
specify authentication,
authorization and
accounting schemes
respectively.
z You need to configure
RADIUS or
HWATACACS before
performing RADIUS or
HWTACACS
authentication.
Configuring Dynamic VLAN
Assignment
Optional
Configuring the Attributes of a Local
User
Optional
AAA
configuration
Cutting Down User Connections
Forcibly
Optional
2.1.2 Creating an ISP Domain and Configuring Its Attributes
Table 2-3 Create an ISP domain and configure its attributes
Operation Command Remarks
Enter system view
system-view
—
Configure the form of the
delimiter between the
user name and the ISP
domain name
domain delimiter { at |
dot }
Optional
By default, the delimiter
between the user name
and the ISP domain name
is “@”.
Create an ISP domain or
set an ISP domain as the
default ISP domain
domain { isp-name |
default { disable | enable
isp-name } }
Required
If no ISP domain is set as
the default ISP domain,
the ISP domain "system"
is used as the default ISP
domain.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English