H3C S3100 8C SI - Setting the Port Security Mode

Operation Manual – Port Security-Port Binding
H3C S3100 Series Ethernet Switches Chapter 1 Port Security Configuration
1-7
1.2.3 Setting the Port Security Mode
Follow these steps to set the port security mode:
To do... Use the command... Remarks
Enter system view
system-view
—
Set the OUI value for user
authentication
port-security oui
OUI-value index
index-value
Optional
In userLoginWithOUI
mode, a port supports one
802.1x user plus one user
whose source MAC
address has a specified
OUI value.
Enter Ethernet port view
interface interface-type
interface-number
—
Set the port security mode
port-security port-mode
{ autolearn |
mac-and-userlogin-sec
ure |
mac-and-userlogin-sec
ure-ext |
mac-authentication |
mac-else-userlogin-sec
ure |
mac-else-userlogin-sec
ure-ext | secure |
userlogin |
userlogin-secure |
userlogin-secure-ext |
userlogin-secure-or-ma
c |
userlogin-secure-or-ma
c-ext |
userlogin-withoui }
Required
By default, a port operates
in noRestriction mode. In
this mode, access to the
port is not restricted.
You can set a port
security mode as needed.