Operation Manual – Voice VLAN
H3C S3100 Series Ethernet Switches Chapter 1 Voice VLAN Configuration
1-13
[DeviceA] vlan 6
[DeviceA-vlan6] quit
# Set the voice VLAN aging timer.
[DeviceA] voice vlan aging 100
# Add a user-defined OUI address 0011-2200-000 and set the description string to
“test”.
[DeviceA] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000
description test
# Enable the voice VLAN function globally.
[DeviceA] voice vlan 2 enable
# Configure the vocie VLAN to operate in automatic voice VLAN assignment mode on
Ethernet 1/0/1. This operation is optional. By default, a port operates in automatic voice
VLAN assignment mode.
[DeviceA] interface Ethernet 1/0/1
[DeviceA-Ethernet1/0/1] voice vlan mode auto
# Configure Ethernet 1/0/1 as a hybrid port.
[DeviceA-Ethernet1/0/1] port link-type hybrid
# Configure VLAN 6 as the default VLAN of Ethernet 1/0/1, and configure Ethernet
1/0/1 to permit packets with the tag of VLAN 6.
[DeviceA-Ethernet1/0/1] port hybrid pvid vlan 6
[DeviceA-Ethernet1/0/1] port hybrid vlan 6 tagged
# Enable the voice VLAN function on Ethernet 1/0/1.
[DeviceA-Ethernet1/0/1] voice vlan enable
1.4.2 Voice VLAN Configuration Example (Manual Voice VLAN Assignment
Mode)
I. Network requirements
Create a voice VLAN and configure it to operate in manual voice VLAN assignment
mode. Add the port to which an IP phone is connected to the voice VLAN to enable
voice traffic to be transmitted within the voice VLAN.
z Create VLAN 2 and configure it as a voice VLAN. Set the voice VLAN to operate in
security mode
z The IP phone sends untagged packets. It is connected to Ethernet 1/0/1, a hybrid
port. Set this port to operate in manual voice VLAN assignment mode.
z You need to add a user-defined OUI address 0011-2200-000, with the mask being
ffff-ff00-0000 and the description string being “test”.
To Next Page
Loading...
Need help?
General