H3C S3100 8C SI User Manual

Operation Manual – 802.1x-System Guard
H3C S3100 Series Ethernet Switches Chapter 1 802.1x Configuration
1-17
1.3.3 Timer and Maximum User Number Configuration
Table 1-2 Configure 802.1x timers and the maximum number of users
Operation Command Remarks
Enter system view
system-view
—
In
system
view
dot1x max-user
user-number [ interface
interface-list ]
interface interface-type
interface-number
dot1x max-user
user-number
Set the
maximu
m
number
of
concurre
nt on-line
users for
specified
ports
In port
view
quit
Optional
By default, a port can
accommodate up to 256 users at
a time.
Set the maximum
retry times to send
request packets
dot1x retry
max-retry-value
Optional
By default, the maximum retry
times to send a request packet is
2. That is, the authenticator
system sends a request packet to
a supplicant system for up to two
times by default.
Set 802.1x timers
dot1x timer
{ handshake-period
handshake-period-value
| quiet-period
quiet-period-value |
server-timeout
server-timeout-value |
supp-timeout
supp-timeout-value |
tx-period tx-period-value
| ver-period
ver-period-value }
Optional
The settings of 802.1x timers are
as follows.
z handshake-period-value: 15
seconds
z quiet-period-value: 60
seconds
z server-timeout-value: 100
seconds
z supp-timeout-value: 30
seconds
z tx-period-value: 30 seconds
z ver-period-value: 30 seconds
Enable the
quiet-period timer
dot1x quiet-period
Optional
By default, the quiet-period timer
is disabled.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English