Operation Manual – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches Chapter 1 FTP and SFTP Configuration
1-6
1.2.2 FTP Configuration: A Switch Operating as an FTP Client
I. Basic configurations on an FTP client
By default a switch can operate as an FTP client In this case you can connect the
switch to the FTP server to perform FTP-related operations (such as creating/removing
a directory) by executing commands on the switch.
Table 1-9 lists the operations that
can be performed on an FTP client.
Table 1-9 Basic configurations on an FTP client
Operation Command Description
Enter FTP client view
ftp [ cluster |
remote-server
[ port-number ] ]
—
Specify to transfer files in
ASCII characters
ascii
Specify to transfer files in
binary streams
binary
Use either command
By default, files are
transferred in ASCII
characters.
Set the data transfer
mode to passive
passive
Optional
passive by default.
Change the working
directory on the remote
FTP server
cd pathname
Change the working
directory to be the parent
directory
cdup
Get the local working path
on the FTP client
lcd
Display the working
directory on the FTP
server
pwd
Create a directory on the
remote FTP server
mkdir pathname
Remove a directory on the
remote FTP server
rmdir pathname
Delete a specified file
delete remotefile
Optional
To Next Page
Loading...
Need help?
General