H3C S3100 8C SI - Enabling Logging for Network Management; Displaying Snmp

Operation Manual – SNMP-RMON
H3C S3100 Series Ethernet Switches Chapter 1 SNMP Configuration
1-8
1.4 Enabling Logging for Network Management
Table 1-6 Enable logging for network management
Operation Command Description
Enter system view
system-view
—
Enable logging for
network management
snmp-agent log
{ set-operation |
get-operation | all }
Optional
Disabled by default.
 Note:
Use the display logbuffer command to view the log of the get and set operations
requested by the NMS.
1.5 Displaying SNMP
After the above configuration, you can execute the display command in any view to
view the running status of SNMP, and to verify the configuration.